Water Cooling Mattress Pad Single

Circulated water pulls the heat out of a single bed all night.

A 70 x 160 cm cooling pad that lies on top of a single mattress and runs chilled water through an internal channel network, so the surface stays cool instead of storing body heat the way foam does. A bedside unit holds a 2.2 litre tank, draws air across a wet cooling pad and pumps the water through two silicone hoses to the mat and back. A full tank runs between seven and twenty hours depending on fan speed, and at the lowest setting the unit stays under 40 dB. An infrared remote changes the setting without getting up, and low-water protection shuts the pump down before it runs dry.

Key Features

• Independent water cooling circuit that carries heat away from the sleeping surface
• 2.2 litre semi-clear tank so the water level can be checked at a glance
• Three fan speeds up to 2,000 rpm with airflow to 3.8 m/s
• Seven to twenty hours of runtime from a full tank depending on the setting
• Under 40 dB at the lowest fan speed, quiet enough to leave running overnight
• Infrared remote control plus touch buttons on the unit itself
• Low-water protection that stops the pump before the tank empties
• Soft grid-quilted top in grey and white that conforms to the body
• External filter on the return line to keep the circuit clean
• Hand-washable pad with leak-resistant seams that tolerate movement through the night

Use Cases

• Hot summer nights on a single bed without running air conditioning
• Student rooms, dormitories and box rooms where a fixed cooling unit is not an option
• Hot sleepers who wake in the small hours
• Guest rooms, hotel stays and short-term rentals

Specifications

• Pad size: 70 x 160 cm (27.5 x 63 in)
• Main unit size: 28 x 16 x 16 cm (11 x 6.3 x 6.3 in)
• Water tank capacity: 2.2 L
• Rated voltage: 5 V DC, 1.2 A, 5 W per hour
• Adapter input: 100-240 V, 50/60 Hz
• Fan speeds: 3, maximum 2,000 rpm
• Maximum airflow: 3.8 m/s
• Noise at minimum speed: under 40 dB
• Water consumption: approximately 130-390 ml per hour
• Full tank runtime: approximately 7-20 hours
• Hose length: 1 m mattress connection, 1.5 m power cord
• Materials: ABS, PP and nylon
• Colour: Grey and White
• Includes: 1 x Cooling Mattress Pad, 1 x Water Cooling Unit, 2 x Silicone Hoses, 1 x External Filter, 1 x Filter Hose, 1 x Power Adapter, 1 x Water Return Device, 1 x Infrared Remote Control, 1 x Type-C Cable, 1 x Spare Water Plug, 1 x Instruction Manual

Dimensions